Power Probe 3 vs 4: Both the Power Probe 3 and the Power Probe 4 are fantastic options to consider in the event that you are looking for electrical system tools. But which of the two options is superior to the other? In this comparative review of the Power Probe 3 and 4, we’ll take a look at both of these devices side by side to see which one offers a superior choice.
Power Probe 3 vs 4 – Quick Comparison Summary
- The year 2013 marked the release of Power Probe 3, while the year 2014 saw the launch of Power Probe 4.
- When compared to the Power Probe 4, the Power Probe 3 is a far more popular electrical system tool on Amazon.
- Power Probe 4 has an AC Min/Max Setting, an Ohmmeter that ranges from 0.1 to 10k ohms, a Frequency (HZ) Scale that goes from 1HZ to 9999HZ/PW, and an injector/driver/ECT Test Mode. While Power Probe 3 does not have these features, Power Probe 2 does.
- The range of the 0 to 70 VDC Power Probe 3 DC voltmeter is significantly lower than that of the 0 to 200 VDC Power Probe 4 DC voltmeter.
- In comparison, the weight of the Power Probe 3 is only 1.36 pounds, whereas the weight of the Power Probe 4 is 2.5 pounds.
- The display type of the Power Probe 3 is an LCD display with only one line, but the display type of the Power Probe 4 is a color multi-line LCD display.
- The Power Probe 3 Dimension has dimensions of 7.75 inches by 2.25 inches by 12 inches. The Power Probe 4 Dimension measures 8 inches by 4 inches by 13 inches.
- While the Power Probe 3 only has two DC settings—Min and Max—the Power Probe 4 can simultaneously use all three DC settings—Avg, Min, and Max.
- Power Probe 3 is less expensive than Power Probe 4.
- The Power Probe 3 circuit breaker requires a reset by hand, while the Power Probe 4 circuit breaker resets itself automatically.
Power Probe 3 | Power Probe 4 | |
FEATURES |  |  |
Brand | Power Probe | Power Probe |
AC Min/Max | Avg, Min, Max Simultaneously | |
Ohmmeter | 0.1 to 10K ohms | |
Frequency (HZ) | 1Hz to 9999Hz/PW | |
Injector/Driver/ECT Test Mode | Yes | |
Voltage Rating | 12-24 VDC | 12-24 VDC |
Display Type | 1 Line LCD Display | Color Multi-Line LCD Display |
Circuit Breaker | Manual Reset | Self-Resetting |
DC Voltmeter | 0 – 70 VDC | 0 – 200 VDC |
DC Min/Max | Min & Max | Avg, Min, Max Simultaneously |
AC Voltmeter | 0.1 to 70.0 VAC (Peak-Peak) | 0.01 to 199.9 VAC (RMS or Peak-Peak) |
Power Source | Battery Powered | Battery Powered |
Style | Circuit Testers | Circuit Testers |
Colo | Red | Red |
Weight | 1.36 Pounds | 2.5 Pounds |
Dimension | 7.75 x 2.25 x 12 inches | 8 x 4 x 13 inches |
Date First Available | October 24, 2013 | September 19, 2014 |
FAQS :
Do you have the ability to test the motor blowers and plugs?
The answer is yes.
Can it put fuses to the test?
You are able to check whether or not power is passing through the fuse, right? You put it to use, similar to a test light. It will show the red plus sign indicating power, and it will also show you the voltage that is being sent through the fuse.
How long are the cords that connect the battery?
The length of the cable that is hooked to the unit is approximately twenty feet in total. It is more than lengthy enough to reach any location within the automobile. That one is perfect for me. It is simple to operate.
When it comes to powering things, how many volts does it put out?
This component is compatible with both 12- and 24-volt DC systems and will supply the voltage of the system to which it is connected. It also features a resettable 15-amp circuit breaker and a ground lead for testing components; thus, it can supply 12 volts if it is coupled to a 12 volt battery. It's the best tool I've ever purchased, and I've been using it for twenty years!
Is it possible to change the voltage of the output? I.e., if I have it connected to the 12 volts of my vehicle, is it possible to modify the output to 5 volts so that I can do a diagnostic on the car's computer?
There is an adapter that can be purchased from the power probe that will lower the output voltage to 5 volts.
Does the wire that connects the batteries have connections that allow an extension to be attached to it, or is it simply wired directly to the clips?
The battery clips are connected by wires to a brief app, which is the answer. a lead that is 6 feet long and has a plug for extensions.
Does it have the capability to test wires for ohms and identify breakage in the line?
The presence of a colored light that does not change shows that the circuit has not been disrupted. It does not show any information regarding ohms. It is able to display the amount of voltage that is currently present in a circuit.
Does the power probe 4 also retain a voltage reading like the power probe 3?
Yes, and it's even better than number 3.
Does the power probe 4 also come with all of the benefits that came with the power probe 3?
Both of these items are already in my possession, but if I were to pick just one, I would go with the Power Probe IV. It is capable of much more than that. Employ it on an almost daily basis.
The piercing tools and cables used for Power4 and Power3 are the same.
Answer: Although the wires are changed, the probe end remains the same. The cable that I purchased from the snap-on truck set me back $150 for a part that was 20 feet long.
Is there a problem with operating at 27–28 volts with this? When an alternator is operating, the voltage on many 24-volt systems is actually between 27 and 28 volts.
I am sorry, but I do not know the answer. Because I was trying to get around a difficulty, I accidentally touched the end of it with some metal, which caused it to burn out. If you don't do stupid things when using it, it will be wonderful and easy to use.
Which of these two tools would you choose to keep in your toolbox if you were forced to make a choice between them, the hook or this one, and why?
In spite of the fact that this is a challenging topic, I'm going to have to state that both of those things are required for a box because of the unique ways in which they might be utilized. If I had to choose one, it w