Skip to content

Golabs R300 vs Jackery 300 – Best 300 Wattage Power Station ???

    GOLABS R300 Portable Power Station

     

     

     

     

    vs

    Jackery Portable Power Station Explorer 300

    Golabs R300 vs Jackery 300

    Golabs R300 vs Jackery 300 : When it comes to portable power stations, what are the key differences between the Golabs R300 and the Jackery 300 models? The comparison evaluation between the Golabs R300 and the Jackery 300 is an investigation into determining which portable power station is superior.

    Golabs R300 vs Jackery 300– Quick Comparison Summary

    • The Jackery 300 battery is a lithium-ion battery, but the Golabs R300 battery is a LiFePO4 battery with a capacity of 2000 cycles.

    • The capacity of the Golabs R300 is 299 Wh, while the capacity of the Jackery 300 is 293 Wh.

    • When compared to the pricey Jackery 300, the Golabs R300 is a more affordable option.

    • The dimensions of the Golabs R300 are 9 inches by 6.18 inches by 7.67 inches, while the dimensions of the Jackery 300 are 9.1 inches by 5.2 inches by 7.8 inches.

    • In comparison to the Golabs R300, the Jackery 300 is an extremely well-liked portable power station on Amazon.

    • The weight of the Golabs R300 is 10.32 pounds, while the weight of the Jackery 300 is 7.1 pounds.

    • While Jackery 300’s power source is AC, car port, and solar panel, Golabs R300’s power source is AC/DC, PD 60W, PD 30W, USB, and cigarette socket.

    • The AC output of the Golabs R300 is 110V, 300W (500W peak), and 60Hz, while the AC output of the Jackery 300 is 110V, 300W (500W peak).

    GOLABS R300 Portable Power Station, 299Wh LiFePO4 Battery Backup with 300W

    Jackery Portable Power Station Explorer 300, 293Wh Backup Lithium Battery

    Golabs R300

    Jackery 300

    FEATURES

    Brand

    Golabs

    Jackery

    Capacity

    299Wh

    293Wh

    AC Ouput

    110V, 300W (500W Peak), 60Hz

    110V, 300W (500W peak)

    Wattage

    300 Watts

     300 Watts

    Power Source

    AC/DC,PD 60W,PD 30W,USB, Cigarette Socket

    AC,Car Port,Solar Panel

     Battery

     LiFePO4 Battery, 2000 Cycles

    Lithium-ion Battery

    Phone

    22 X

    31 X

    LapTop

    5 Charge

    2.5 Charge

    TV

    2 Hrs

    4.5 Hrs

    Weight

    10.32 pounds

    7.1 pounds

    Dimensions

    9 x 6.18 x 7.67 inches

    9.1 x 5.2 x 7.8 inches

    Camera

    16 Charges

    15 Charges

    Color

    Orange

    Black, Orange

    Included Components

    1xCar Cagaritte lighter Plug Charging Cable, 1xMC4 Solar Panel Charging Cable, 1xGOLABS R300 Portable Solar Generator, 1xAC Power Adapter

    1* Jackery Explorer 300 Portable Power Station , 1*AC adapter, 1* car charger cable, 1* user guide

    Drone

    7 Charges

    6 Charges

    FAQS :

    Is the 12 volt output regulated, for instance, is the dc voltage at 12 volts or greater when the cell is down to 50%?

    Since LifePO4 batteries have a different chemistry than Lithium Polymer batteries, the DC current has a distinct voltage curve. In my personal tests, I found that while utilizing a 12 volt cigarette lighter port, the voltage was 13.01 volts when the battery was fully charged and 13.24 volts when it was 30% drained. Hope this is useful!

    The E01 error code entered dc mode. I experimented with unplugging, waiting, and reconnecting, as well as many press-and-hold techniques. Everything failed.

    I can vouch for the assertion made in another review that charging the device is necessary to reset some of the codes. For a long time, my DC output was generating an E01 error code. I plugged the charger in a while ago, and only now did I realize that it had "rebooted"; the display had been reset, and the DC output has since been error-free. I had also emailed their customer service, but all I got in return was a message promising to get back to me. I advise leaving the device plugged in to see if the codes may be reset. Just leave it plugged in; it won't happen right away.

    I can get it to beep and display E09 when I connect it to a solar panel. Why does that matter?

    It denotes an overvoltage on the input power source (I experience this with my 60w solar panel), but it's a minor issue; simply ignore it, and the charging process will proceed. When I combine two Rockpals RP081 (60w) panels, I can reach a maximum input charging power of 62 watts. Even with the sun entirely covered in clouds, I can still obtain 9–10 watts using both. Simply disregard the E09 error. When connecting to an external solar charging panel, just one of my THREE of these GoLabs units experiences this issue.

    Can this power a Sony Smart TV and a PS5 at the same time, and if so, for how long?

    You could suggest a much bigger power station or an inverter generator that runs on gas. A 43-inch LED TV would use about 80 watts of power. During gameplay, a PS5 usually uses about 200 watts of power. All of that would add up to 280 watts. You can always buy a "Kill-A-Watt" meter from Amazon for $35 to check the exact wattage of your setup. The battery capacity of the Explorer 300 is 293 Wh (watt hours), and the efficiency of the inverter would be about 85%. See the table below for a hypothetical comparison of run times with a 280-watt load.

    Can you use and charge at the same time?

    Answer: I don't know where the term "damage the battery life" comes from. As Pass through charging is made to let power flow to a device without affecting how well the battery works. Neither Once the battery is fully charged, the extra power going to the device makes it either do nothing or do something. It will send power directly to a device that is plugged in without using the battery. The same as when in charge. While the battery is being charged, a certain amount of power is taken away from charging the battery itself and given to the device that needs power. This will make it take longer to charge, but it will give the device that's already plugged in the extra power it needs without draining the battery. This is also done on many devices on the market today, like phones, laptops, tablets, and so on. Due to using or charging a device, it's even better to leave it plugged in. It won't have any effect on the internal battery, and the box will keep it topped off with a slow charge until the power goes out and you need that 100% point.

    Can I charge with more than one 100-watt solar panel? Or one that is rated at more than 100w? Would it be okay to use panels with more wattage?

    Answer: You can connect as many solar panels as you want to the Jackery Explorer 300 as long as the charging voltage stays between 12 Volts DC and 30 Volts DC. The E300's MPPT controller will only let it charge up to about 80 or 90 Watts. As long as the voltage is between 12 and 30 Volts, panels with more wattage are fine. If you connect your panels in series, the voltage will be much higher than 30 volts for most "12-volt" panels.

    Amazon.com Description: Golabs R300 vs Jackery 300

    About this item – GOLABS R300 Portable Power Station, 299Wh LiFePO4 Battery Backup with 300W Pure Sine Wave AC Peak 500W, Car Outlets, PD 60W Quick in/out Solar Generator for Outdoor Camping Emergency CPAP Orange

    • The voltage range of our GOLABS portable power station is 10.8-23.5V (3 A), and the maximum input power can reach 60 W.80W to 100W solar panels are what we advise.
    • ECONOMICALLY SAFE CLEAN OUTDOOR POWER The GOLABS power source operates quietly, consumes no fuel or gasoline, and protects both you and your gadgets from over-voltage, over-current, and over-temperature situations. You may be escorted by the Battery Management System (BMS) indefinitely. Utilize with assurance.
    • QUICK CHARGE 60W PD & VARIABLE OUTPUTS Two 110V 300W AC pure sine wave outlets (frequency 60 Hz); two DC outputs (12 V/10 A); two QC 3.0 USB outputs (5 V/3 A, 9 V/2 A, and 12 V/1.5 A); and one cigarette lighter output (12 V/10 A) are built into the GOLABS portable power station.
    • The portable power station GOLABSR R300 is capable of supporting devices rated at less than 300W, for example, phones, laptops, cameras, drones, LED lights, and tiny fans. (Please verify your devices’ open-circuit current and voltage.)
    • LIFEPO4 BATTERY POWER SUPPLY UPGRADE Thermal and chemical stability, which increases battery safety, is one of LiFePO4 batteries’ key advantages over other battery types. It offers 2000 cycles and more than ten years of use for the GOLABS portable power station.
    • PURE SINE WAVE AC OUTLET, 300W By creating clean, stable electricity with a pure sine wave, this portable power generator from GOLABS will safeguard some delicate equipment, such as laptops and CPAP machines. It has a constant 300-watt AC outlet and a 500-watt peak power output to start additional electrical equipment.
    • What you receive You will obtain One Golabs R300 power supply unit, one AC wall charger, one car port cable, one MC4 solar charging cable, and one user manual are included. Buy the GOLABS power plant with assurance: a year’s warranty and prompt customer service available 24 hours a day. Please feel free to contact us if you have any questions.
     

    About this item – Jackery Portable Power Station Explorer 300, 293Wh Backup Lithium Battery, 110V/300W Pure Sine Wave AC Outlet, Solar Generator (Solar Panel Not Included) for Outdoors Camping Travel Hunting Blackout

    • The power station is compatible with the Jackery SolarSaga 100 solar panel. Green Power Supply The portable power kits are perfect for tent camping, overland travel, and other activities because the inbuilt MPPT controller enables the solar generator set to function at its maximum power point, which speeds up the battery recharging.

    • SECURE & CONSISTENT POWER SUPPLY: The Explorer 300 has 2 Pure Sine Wave AC outlets that supply reliable and secure 300W power and are powered by a 293Wh lithium-ion battery pack. Only 7.1 pounds make up the weight of the portable power unit. When engaging in outdoor, off-grid activities, you can just relax.

    • Included in the package are: 1 Jackery Explorer 300 Portable Power Station, 1 AC adapter, 1 car charger cable, and 1 user manual.

    • Speed Up Your Rechargeability: The power station’s 80% battery can be charged in about 2 hours using both a wall outlet and a 60W PD USB-C connector. You can also use a Jackery SolarSaga 100 or an AC adapter to recharge your power station, whether you’re at home or traveling.

    • POWER YOUR OUTCOMES: The power station can recharge itself and charge (up to) 6 devices (e.g., drones, laptops, cameras, etc.) at the same time to meet your outdoor needs. It has 2 AC outlets, 1 PD 60W USB-C connector (input/output supported), 1 rapid charge 3.0 port, 1 USB-A port, and 1 DC vehicle plug.

    • Every outdoor enthusiast’s power needs are met by Jackery’s introduction of solar generators, which encourages them to travel further in search of more environmentally friendly adventures.

    • Jackery, a solar generator pioneer and top-selling brand with over 2 million users and 150 accredited media outlets and organizations globally, was established in California in 2012 with the mission of providing green energy to everyone and everywhere.