Skip to content

Miller 211 vs 215 – Comparison Electric Welder

    MILLER ELECTRIC MIG Welder,120/240VAC,1 Phase






    Miller Electric Multiprocess Welder,Multimatic(TM) 215

    Miller 211 vs 215

    Miller 211 vs 215:Both the Miller 211 and 215 electric welders are excellent choices, but which one is the superior model? In this Miller 211 vs. 215 comparison review, we’re trying to determine which product is superior.

    Miller 211 vs 215 – Quick Comparison Summary

    • Miller 211 is the heaviest welder with a weight of 49.89 pounds, while Miller 215 is the lightest with a weight of 38 pounds. Miller 211 is an older version that was first released in 2015. Miller 215 is the most recent version, having been released in 2016.

    • A well-liked product on Amazon is the Miller Electric Mig Welder 211.

    • Both the Mille 215 and the Mille 211 come with a three-year welder warranty, a one-year gas regular warranty, and a 90-day warranty on the welding gun, respectively.

    • Miller 215 has a Multiprocess Welder process type, whereas Miller 211 has simply a Mig Welder process type.

    • The Miller Electric Mig Welder 211 is a more affordable option. Miller’s 215 is a high-priced item.

    • Miller 211 has the following dimensions: 23.8 x 15.2 x 16.2 inches. However, the Miller 215’s dimensions are 20.5 inches wide by 11.25 inches deep and 12.5 inches high.

    • The wire speed range for both Miller 211 and 215 is 60-600 inches per minute, and the input voltage is the same at 110, 115, and 120 volts.

    MILLER ELECTRIC MIG Welder,120/240VAC,1 Phase


    Miller Electric Multiprocess Welder,Multimatic(TM) 215

    Miller 211

    Miller 215




    Wire Speed Range

    60 – 600 in/min

    60 – 600 in/min

    Processes Supported

    MIG, Flux-cored

    MIG, Flux-cored, DC TIG, DC stick

    Product Dimensions

    23.8 x 15.2 x 16.2 inches

     ‎20.5 x 11.25 x 12.5 inches


    49.89 Pounds

    38 Pounds

    Included Components

    MIG Welder,120/240VAC,1 Phase

    Multiprocess Welder,Multimatic(TM) 215

    Item Thickness

    11 inches

    11 inches

    Input Voltage

    110/115/120 V
    220/230/240 V

    110/115/120 V
    220/230/240 V

    FAQS :

    To power this Miller, what size generator is required?

    According to the Miller 2018 catalogue, if the Miller 211 (dual voltage 120vac/220vac) is plugged into 120 Volts AC, the input current draw is up to 24.3 amps, and if the unit is plugged into 220 Volts AC, the input current draw is up to 16.6 amps. Assuming these current requirements are at maximum welding settings, turning the welder to lower settings will almost certainly reduce the input current requirements. A 7000-watt generator with four 120V 20A three-prong outlets and a twist-lock 120/240V 30A outlet is available on Amazon. If you hook the welder into the generator's 220V socket, this should be enough to power it.

    Will this machine be able to handle a 10 pound spool of wire?

    Yes, of course. The weights of the spools, which are actually one 8" spool, can vary.

    Where did this welder come from?

    Answer: All of the components are created in China, with the exception of the case, which is made in the United States.

    Is this machine capable of handling 0.35 wire?

    Yes, of course! The machine can handle wire gauges of 024, 030, and 035. In addition, iris can handle all three sizes on a single feed roller, depending on how the drive roller is configured. For videos, go to This gadget is incredible, and we've made a lot of money with it. We have two.

    Is the $100 rebate still valid if I purchase this welder online?

    Yes, of course! Miller's Summer Savings Build With Blue Rebate applies to this item. Miller will give you a $100 rebate if you purchase. Only until September 30th, 2018, may you take advantage of this offer.

    Where do we get the $300 rebate form? Or are they just going to mail it to us?

    Answer: There is a rebate section on Miller's website where you may apply for a rebate.

    Is this alternating current and direct current?

    DC is the correct answer.

    Can I use a Predator 3500 inverter generator to power this welder?

    Answer: Perhaps on 115v settings, but I doubt 230v operation will keep up or provide enough amperage.

    Is there a high frequency or pulse setting for tig on this machine?

    It simply has lift arc start TIG and no pulse or high frequency. Lift arc start is difficult to master quickly, hence it is not advised for new tig welders. You can learn to utilise it effectively with consistent practise. The Miller 215 multiprocess welder, on the other hand, is a great MIG machine with the ability to stick or tig weld. Description: Miller 211 vs 215

    About this item – MILLER ELECTRIC MIG Welder,120/240VAC,1 Phase

    • M-10 MIG gun, 10 ft. Work Cable with Clamp, Built-In Gas Solenoid Valve, Dual Gauge Regulator with Gas Hose, 0.030 in. (2) 0.030 in. solid wire sample spoolsSolid Wire Sample Spool (2) Hook-and-Loop Cord Wraps (2) Contact Tips The Thickness of the Material Gauge Certification by the CSA is required.12-1/2-inch overall height

    • Detection, Advanced Auto-SetTM, Smooth-StartTM, Angled Cast-Aluminum Drive System, Quick SelectTM Drive Roll, Thermal Overload Protection, Fan-on-Demand Voltage: 240VACAluminum and steel are the materials that are welded together. 30 to 230A DC output range MIG/Flux Welding Processes Core Portable applications include maintenance, repair, auto/cycle shops, farm and ranch jobs, and hobby welding.

    • Millermatic 211 MIG Welder with Advanced Auto-Set-907614

    • Millermatic 211 MIG Welder with Advanced Auto-Set

    • The price for each series is as follows: Aluminum Millermatic 211 Stainless Steel-Material Thickness: 24 ga. to 3/8″ Mild Steel -Material Thickness: 18 ga. to 3/8″; Thickness of material: 20 ga. to 1/4″ Hz: 60 Input Amps: 17

    About this item – Miller Electric Multiprocess Welder,Multimatic(TM) 215

    • A versatile and easy-to-use MIG, Stick, and DC TIG welder that aids in the development of skills. The Auto-SetTM Elite is featured on the colour screen. This all-in-one welder accepts 120 or 240 volts as an input voltage. Welds mild steel up to 3/8″ thick.
      Generators are compatible.

    • Capabilities in a variety of processes
      Multiprocess Welder, Multimatic [R] 215, 1 Phase, 120/240V AC Input, 20 to 230A DC Output,Multimatic [R] 215 Multimatic [R] 215 Multiprocess WelderMultimatic [R] 215 Multiprocess WelderMultiprocess Welder, Multimatic [R 240 V]-150 A @ 21.5 V DC MIG, 190 A @ 17.6 V DC TIG, 190 A @ 27.6 V DC Stick, Duty Cycle 20% Stick and TIG, 240 V-40% MIG, 50/60 Hz, Color LCD Two gas connections, a multi-voltage plug, and multiprocess capabilities are included.Light Fabrication, Maintenance and Repair, Autobody/Farm/Home
      Processes such as MIG, flux-cored, DC stick, and DC TIG allow you to hone your talents.

    • Color LCD with Auto-Set TM Elite The Auto-Set Elite allows you to fine-tune your settings and may be utilised on a variety of materials and procedures. It’s very easy to set up and use!

    • When fueled by generators with a 10000 watt (10K) or higher output, such as a Miller Bobcat or Trailblazer series generator, the Multimatic 215 will be able to run and offer full output. When using smaller generators, the output will be limited.